Volvo 960 service & repair manual

MIRRORS - POWER


1994 Volvo 960


1994 ACCESSORIES/SAFETY EQUIPMENT

Volvo Power Mirrors


960


DESCRIPTION & OPERATION


image

Power mirrors are standard on 960. Power mirrors are controlled by switches located on driver’s door panel. See Fig. 1.


Fig. 1: Exploded View

Of Power Mirror Assembly

(960)

Courtesy of Volvo Cars

of North America


TESTING


NOTE: Testing is not available from manufacturer.


REMOVAL & INSTALLATION


POWER MIRROR MOTOR


Removal & Installation

  1. Remove mirror glass by pressing on lower edge of mirror until cogs can be seen in slit in bottom of mirror assembly. Using a screwdriver, move cogs to the left and lift out mirror glass. See Fig. 2.

  2. Remove 4 screws and lift out motor. See Fig. 3. Disconnect wiring. To install, reverse removal procedure.


image


Fig. 2: Removing Mirror Glass

Courtesy of Volvo Cars of North America


image


Fig. 3: Removing Power Mirror Motor Courtesy of Volvo Cars of North America


POWER MIRROR ASSEMBLY


Removal & Installation

Remove door panel. Remove power mirror panel. Disconnect switch wiring. Remove 3 bolts. Remove power mirror assembly. See Fig. 4.


image


Fig. 4: Removing Power Mirror Assembly (960) Courtesy of Volvo Cars of North America


WIRING DIAGRAM


image

Fig. 5: Power Mirrors Wiring Diagram (960)

 

 

Disclaimer: Volvotips has the exclusive courtesy of Volvo Car Corporation and Volvo Cars Heritage to publish the Volvo Greenbooks (service manual), parts catalogs and other Volvo-material and publications. Commercial use and publishing at other websites of these items is prohibited.